IEC 2009年2月上旬颁布的新标准目录

Materials for printed boards and other interconnecting structures - Part 2-32: Reinforced base materials, clad and unclad - Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad

IEC 61249-2-34

Materials for printed boards and other interconnecting structures - Part 2-34: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 3,7 at 1 GHz) and flammability (vertical burning test), copper-clad

Surface mounting technology - Environmental and endurance test methods for surface mount solder joints - Part 1-5: Mechanical shear fatigue test

Amendment 1 - Packaging of components for automatic handling - Part 5: Matrix trays

Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems

电弧焊设备---第8部分： 电弧焊控制台和等离子体切割系统

Materials for printed boards and other interconnecting structures - Part 2-31: Reinforced base materials, clad and unclad - Halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad

Materials for printed boards and other interconnecting structures - Part 2-33: Reinforced base materials, clad and unclad - Non-halogenated modified or unmodified resin system, woven E-glass laminate sheets of defined relative permittivity (equal to or less than 4,1 at 1 GHz) and flammability (vertical burning test), copper-clad

Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing

Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

Fibre optic interconnecting devices and passive components performance standard - Part 031-3: Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD) for Category U - Uncontrolled environment

IEC 61784-5-3 Corr.1

Corrigendum 1 - Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3

勘误表1---工业通信网络---剖面---第5-3部分： 现场总线的绝缘--- CPF 3用安装性能

Corrigendum 1 - Industrial communication networks - Installation of communication networks in industrial premises

Coaxial communication cables - Part 1-201: Environmental test methods - Test for cold bend performance of cable

Coaxial communication cables - Part 1-208: Environmental test methods - Longitudinal pneumatic resistance

Coaxial communication cables - Part 1-313: Mechanical test methods - Adhesion of dielectric and sheath

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

Hydraulic machines, radial and axial - Performance conversion method from model to prototype

Wind turbine generator systems - ALL PARTS

Wind turbines - Part 3: Design requirements for offshore wind turbines

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

机械安全性---机械电气设备---第1部分： 总要求

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers

Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications

This Test Report Form applies to IEC 60227-6-:2001(Third Edition) in conjunction with IEC 60227-1:2007 (Third Edition) and/or IEC 60227-2:1997 (Second Edition); A1:2003

该试验报告格式适用于IEC 60227-6-: 2001(3版) ，与 IEC 60227-1:2007 (3版) 及 IEC 60227-2:1997 (2版); A1:2003一起用

This Test Report Form applies to IEC 60598-2-23:1996+A1:2000 used in conjunction with IEC 60598-1:2008

该试验报告格式适用于IEC 60598-2-23: 1996+A1:2000，适用于 IEC 60598-1:2008

This Test Report Form applies to IEC 60598-2-22:1979+A1:2002+A2:2008 used in conjunction with IEC 60598-1:2008

该试验报告格式适用于IEC 60598-2-22: 1979+A1:2002+A2:2008 ，与IEC 60598-1:2008一起用

This Test Report Form applies to IEC 60745-2-6:2003 (2nd Edition) + A1:2006 in conjunction with IEC 60745-1: 2006 (4th Edition)

该试验报告格式适用于IEC 60745-2-6: 2003 (2版) + A1: 2006，与 IEC 60745 -1 : 2006 (4版一起用)

This Test Report Form applies to IEC 60745-2-2:2003 (2nd Edition) in conjunction with IEC 60745-1: 2006 (4th Edition)

该试验报告格式适用于IEC 60745-2-2: 003 (2版)，与IEC 60745-1: 2006 (4版)一起用

This Test Report Form applies to IEC 60745-2-1:2003 (2nd Edition) in conjunction with IEC 60745-1: 2006 (4th Edition)

该试验报告格式适用于IEC 60745-2-1: 2003 (2版)，与IEC 60745-1: 2006 (4版)一起用

Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment

Amendment 1 - Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests

Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL

Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

修改2---电磁兼容性(EMC)---第3-2部分： 范围---谐波电流辐射范围（设备各相电流输入不超过16A）

Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

Electromechanical contactors for household and similar purposes